Electrical Controls Engineer - Now Hiring
Did you love building as a kid? Do you enjoy taking something apart, just to figure out how to put it back together? Do you geek out on robots? Our engineers drive packaging innovation, creating new ways to improve - and increase - performance.
We're passionate about designing custom equipment that exceeds our customers' expectations.
Our engineers partner closely not only with our customers, but also with peers across sales, manufacturing, and assembly.
We offer rewarding, challenging opportunities throughout the world, across multiple packaging segments.
If you're excited by how machines work and want to make them better, we want to talk to you.
Do we have your attention? Keep reading.
is seeking an Electrical Controls Engineer who employs analytical and problem-solving skills to assist in the design of comprehensive electrical controls systems for automated production lines in the packaging industry.
The Electrical Controls Engineer is responsible for aiding in the overall design of the system including control panels and field devices, schematics detailing, and programming PLC, HMI and servos in accordance with industry and client guidelines.
The position reports to the Electrical Engineering Supervisor and is located on-site at our Deer park, NY office.
Does this work interest you? Apply electrical engineering knowledge to machinery principles and materials, manufacturing methods and processes to ensure that designs are functional, practical, economical, safe, meet required codes and satisfy customer operating requirements.
Interface with senior engineers, project managers and occasionally customers to understand and clarify specifications and project design objectives.
Operate computer-assisted design software to perform engineering tasks.
Work with panel shop technicians to ensure that assembly, wiring, installation and operation of control panels and electrical systems conform to quality standards, applicable codes and customer requirements.
Construct accurate and complete bills of material based on designs that conform to cost and performance objectives.
Inspect, install, troubleshoot and debug machine systems during manufacture and prior to shipment.
Proactively revise designs to meet specifications and deadlines.
As needed, provide on-site and off-site technical support to the Company's Field Service Technicians and customers to address and resolve issues encountered during machine installation, start-up, repair and retrofit.
Write, compile and produce preventative maintenance procedures for Modern control panels and electrical systems.
What's in it for you? There's no monopoly on good ideas or limits to how far you can advance with our team.
We offer an open, communicative environment that fosters individual initiative.
We pride ourselves in being a company where people choose to build a career and find professional happiness.
At ProMach the education and experience you bring to a role with us matters.
Placement within the salary range is based upon years of directly relatable experience for the position.
These components, along with local and national compensation survey data, contribute to determining a candidate's potential starting rate of pay.
Total compensation includes your base salary, medical/dental/vision insurance, life insurance, disability, paid time off, and a retirement savings plan with company match.
There is no waiting period for benefits - you are eligible on your first day of employment.
Base Salary Range:
$80,000 - $100,000.
If this sounds like you, we want to connect! BS in Electrical Engineering.
2-5 years practical experience in electrical design and/or application engineering, advanced coursework may satisfy this requirement.
Familiar with UL, NEMA and CE code.
Proficient with AutoCAD Electrical design software.
Knowledge of electrical design standards, Allen Bradley PLC & HMI logic, servo/AC/DC motors, electrical power distribution.
Excellent verbal and written communication skills.
Good interpersonal skills to successfully interface with superiors, peers and external customers.
Ability to work both independently and in a team environment.
Flexible and dedicated to doing what it takes to get the job done.
Ability to effectively prioritize duties and handle multiple projects concurrently to meet deadlines.
Proficient with Microsoft Office Suite.
Ability to travel domestically up to 25%.
We have been named to the Inc.
5,000 list of the fastest growing private companies in the U.
S.
seven times.
We continue to introduce innovative products, enter new markets, expand our global presence, and actively acquire new capabilities.
We have the rewards, opportunities, and the market strengths of a large organization combined with the entrepreneurial culture of a small, fast-paced company.
You will enjoy the benefits of working with a growing company that competes globally with the personal touch and feel of a smaller company where you can make an impact every day.
Curious about life at ProMach? Follow us on , , and ! #MODER #INMODSalary:
$22 per hour.
Estimated Salary: $20 to $28 per hour based on qualifications.
We're passionate about designing custom equipment that exceeds our customers' expectations.
Our engineers partner closely not only with our customers, but also with peers across sales, manufacturing, and assembly.
We offer rewarding, challenging opportunities throughout the world, across multiple packaging segments.
If you're excited by how machines work and want to make them better, we want to talk to you.
Do we have your attention? Keep reading.
is seeking an Electrical Controls Engineer who employs analytical and problem-solving skills to assist in the design of comprehensive electrical controls systems for automated production lines in the packaging industry.
The Electrical Controls Engineer is responsible for aiding in the overall design of the system including control panels and field devices, schematics detailing, and programming PLC, HMI and servos in accordance with industry and client guidelines.
The position reports to the Electrical Engineering Supervisor and is located on-site at our Deer park, NY office.
Does this work interest you? Apply electrical engineering knowledge to machinery principles and materials, manufacturing methods and processes to ensure that designs are functional, practical, economical, safe, meet required codes and satisfy customer operating requirements.
Interface with senior engineers, project managers and occasionally customers to understand and clarify specifications and project design objectives.
Operate computer-assisted design software to perform engineering tasks.
Work with panel shop technicians to ensure that assembly, wiring, installation and operation of control panels and electrical systems conform to quality standards, applicable codes and customer requirements.
Construct accurate and complete bills of material based on designs that conform to cost and performance objectives.
Inspect, install, troubleshoot and debug machine systems during manufacture and prior to shipment.
Proactively revise designs to meet specifications and deadlines.
As needed, provide on-site and off-site technical support to the Company's Field Service Technicians and customers to address and resolve issues encountered during machine installation, start-up, repair and retrofit.
Write, compile and produce preventative maintenance procedures for Modern control panels and electrical systems.
What's in it for you? There's no monopoly on good ideas or limits to how far you can advance with our team.
We offer an open, communicative environment that fosters individual initiative.
We pride ourselves in being a company where people choose to build a career and find professional happiness.
At ProMach the education and experience you bring to a role with us matters.
Placement within the salary range is based upon years of directly relatable experience for the position.
These components, along with local and national compensation survey data, contribute to determining a candidate's potential starting rate of pay.
Total compensation includes your base salary, medical/dental/vision insurance, life insurance, disability, paid time off, and a retirement savings plan with company match.
There is no waiting period for benefits - you are eligible on your first day of employment.
Base Salary Range:
$80,000 - $100,000.
If this sounds like you, we want to connect! BS in Electrical Engineering.
2-5 years practical experience in electrical design and/or application engineering, advanced coursework may satisfy this requirement.
Familiar with UL, NEMA and CE code.
Proficient with AutoCAD Electrical design software.
Knowledge of electrical design standards, Allen Bradley PLC & HMI logic, servo/AC/DC motors, electrical power distribution.
Excellent verbal and written communication skills.
Good interpersonal skills to successfully interface with superiors, peers and external customers.
Ability to work both independently and in a team environment.
Flexible and dedicated to doing what it takes to get the job done.
Ability to effectively prioritize duties and handle multiple projects concurrently to meet deadlines.
Proficient with Microsoft Office Suite.
Ability to travel domestically up to 25%.
We have been named to the Inc.
5,000 list of the fastest growing private companies in the U.
S.
seven times.
We continue to introduce innovative products, enter new markets, expand our global presence, and actively acquire new capabilities.
We have the rewards, opportunities, and the market strengths of a large organization combined with the entrepreneurial culture of a small, fast-paced company.
You will enjoy the benefits of working with a growing company that competes globally with the personal touch and feel of a smaller company where you can make an impact every day.
Curious about life at ProMach? Follow us on , , and ! #MODER #INMODSalary:
$22 per hour.
Estimated Salary: $20 to $28 per hour based on qualifications.
|
|
 | |
